Most Popular

  • Magnum 6K32T and TR High-Port Density Managed Gigabit Ethernet Switches
    The 6K32T and the 6K32TR (Reverse model with ports and power supply in the rear, LEDs in the front) provide 16 fixed copper ports, and two modular slots for configuration…
  • CX-UA Series
    Memotec's CX-UA Series is a dedicated cellular backhaul platform delivering 2G, 2.5G &3G Radio Access Network (RAN) optimization for GSM and CDMA cellular operators with HSPA traffic offload capabilities. It…
  • LED Street Lights Life-cycle Cost Analysis
    In this example we compare the life-cycle costs Lucas II 84 street lights with normal incandescent lamps and the most commonly available High Pressure Sodium Street Lights with the same…
  • U-Tron Lucas Flat Panel
          Introduction to our Lucas FP   {quickdown 329} FP stands for Flat Panel. So we can make use of the lenses that are widely available in the…
  • CX-U Series Backhaul Platform
    Memotec’s CX-U Series is a dedicated cellular backhaul platform delivering Radio Access Network (RAN) optimization, and A/E voice trunks compression. The CX-U reduces the bandwidth required to backhaul cellular traffic,…
Has no content to show!
/index.php?plg=sslfixer&url=http%3A%2F%2Fwww.memotec.com%2Fimages%2FCX-UA.gifMemotec's CX-UA Series is a dedicated cellular backhaul platform delivering 2G, 2.5G &3G Radio Access Network (RAN) optimization for GSM and CDMA cellular operators with HSPA traffic offload capabilities. It enables operators to quickly deploy 3G and HSPA services over their existing transmission network, without costly upgrades and at a lower cost. Supporting TDM, ATM-IMA, Ethernet, Pseudowire and IP/MPLS, it also offers a seamless migration to an all-IP RAN infrastructure and the ability to use new broadband access transmission technologies.
The CX-UA has a key role within microwave environments where spectrum allocation restrictions may not allow further bandwidth acquisition. The ability to compress and optimize the information that flows through allows to create more room and alleviate the restrictions. As a result, the operator can continue acquiring new subscribers and accomodate more traffic.


The CX-UA Series brings together a flexible transmission access node and optimization device. Housed in a compact 1U chassis, the CX-UA delivers 2G-3G CDMA/GSM traffic aggregation and bandwidth optimization at the cell site or RAN hubbing point. It also offers a variety of backhaul interfaces and transmission options, including high speed direct interfaces to the Base Station Controller (BSC) or Radio Network Controller (RNC) nodes.

The CX-UA family is comprised of 3 products: CX-UA 1000, 4000 and 9000. All CX-UA platforms are designed to the most stringent carrier-grade standards, anf offer 1+1 or 1:n redundancy options. The CX-UA 1000 is the access node; it offers up to 32 E1 interfaces, Ethernet and STM-1 SDH interfaces (electrical or optical). . The E1 interfaces may be used to connect the NodeB, BTS or the RAN transmission equipment. The CX-UA supports Abis, CDMA TDM, CDMA ATM, Iub (with ATM-IMA), ATM-IMA uplink and Ethernet or IP/MPLS interfaces and protocols.

The CX-UA 4000 and 9000 (at the central office) both offer a high density modular chassis, connecting traffic to the RNC, or BSC over a choice of STM-1, STM-4 or GE interfaces.

/index.php?plg=sslfixer&url=http%3A%2F%2Fwww.memotec.com%2Fimages%2FCX-UA-Series-flowchart.gif








CAPACITY CX-UA1001 CX-UA1002 CX-UA4000 CX-UA9000
E1 (TDM or ATM) 16 up to 32 up to 96 (6x16) up to 256 (16x16)
E1/VC12 ATM 21 63 126 252
E1 Abis 1 to 4 up to 16 up to 48 (6x8) up to 128 (16x8)
Ethernet Electrical 3 3 3 3
Ethernet Optical (SFP) 1 1 3 (2+1) 2
STM-1 (SDH + ATM) 1 1 0 6 (4+2)
STM-4 0 0 0 2
ADSL2+/VDSL modem 1 (option) 0 0 0


* Increase Revenue and Profits
  • Enables immediate roll-out of 3G and HSPA services
  • Improves coverage of new services through re-use of legacy transmission infrastructure
  • Increases penetration by expanding the capacity of existing networks
* Reduced OPEX / Minimal CAPEX
  • Increases backhaul capacity without added transmission resources or network upgrade
  • Takes advantage of lower cost broadband access services and IP-RAN technologies
  • Rapid ROI - often in only a few months
* Sustained service quality
  • Preserves mainstream revenue generating services
  • Maintains voice quality and service integrity
  • Simple and reliable fail-safe operation

* Digital E1: unframed, fractional, channelized TDM and ATM with IMA (up to 8 E1s) interfaces:
  • E1 line type : G.703/G.704 with or without CRC4 & MF
  • E1 encoding: HDB3, AMI, NRZ, NRZi, 75 or 120 Ohms
  • NFAS, AIS and RDI bits/alarm relay
  • Balanced 120 Ohms (RJ21) or Unbalanced 75 Ohms (BT43) connectors
* Ethernet: 10/100/1000 Mb/s, RJ 45 or SFP plug-in connector
* STM-1 ATM or SDH channelized VC12 interface [supports ATM IMA VC12], SFP connector
* STM-4 ATM or SDH channelized VC12 interface [supports ATM IMA VC12], SFP connector
* RS232 Serial craft interface
* Optional: VDSL / ADSL2+ line modem


Read more...
CX800 Data Compression Modems (obsolete) This product is not available anymore.Please select from the Memotec CX-U series.
Read more...
Plese select from CX-U series
Read more...

This item is discontinued by Memotec. Please call U-Tron for checking availability on a specal order basis.

Read more...

 

Magnum 6KL Industrial Ethernet
Managed Edge Switches

"Configurability at the Edge"

Magnum 6KL  Industrial Ethernet Managed Edge Switch

Magnum 6KL is an Industrial Ethernet Edge Switch with full-featured MNS-6K software. The base unit also has four 10/100 copper ports. Up to four 100Mb fiber ports (SC, ST, LC, and MTRJ), four 10Mb fiber ST ports, or up to four more 10/100 copper ports (or combinations) may also be configured. Up to 2 Gb ports are optional.
6KL   Configuration Guide6KL   DatasheetD0897ef0d83df5c7802fb2ecf6e6384a

The Magnum 6KL contains the following features:

  • Includes full-featured MNS-6K software in a small industrial package
  • Highly configurable, all fiber port types, and up to 2 Gb with SFPs
  • Up to 4 100Mb fiber ports (SC, ST, LC, MTRJ) may be configured. Multi-mode & single mode
  • Up to 4 10 Mb fiber ST ports
  • Hardened steel case serves as a heat sink for heat dissipation (no fans); IP52 for environmental protection
  • Conformal Coating, choice of light duty (6 mil) for humidity and heavy duty (14 mil) for oil, gas and petrochemicals
  • DC power at 12V, 24V, 48V, 125V, and 250V Dual-Source; PoE; Universal AC optional
  • PoE configurable, Up to 8 ports
  • Meets IEC 61850 and IEEE 1613 Environmental Standard for Electric Power Substations
  • Non-blocking wire speed performance on all ports, 802.1p QoS prioritization
  • Comprehensive Magnum MNS-6K software includes:  GUI for ease-of-use, SNMPv2, v3, RMON, Advanced Security, SNTP, Event Log, BootP, DHCP
  • MNS-6K-SECURE software for extra security is available.
  • IGMP Snooping with Multicast Message Filtering or Pruning.  IGMP-L2 for multicast management
  • Manages redundant rings with the S-Ring™ software product.  RSTP and software Dual-Homing included
  • DIN-Rail optional, panel-mount brackets included
  • For Rackmount options, click here.
Related Links:

6KL Photo

6KL Port Modules
Configuration Guide

6K Family of Switches

MNS-6K Software

Secure Web Management

Security

Redundancy

Magnum Industrial Switches Pictorial (pdf)

All Managed Ethernet
Switches

Read more...

 

 

/index.php?plg=sslfixer&url=http%3A%2F%2Fwww.garrettcom.com%2Fimages%2F6k16twotraymounted.jpg
Two 6K16s side-by-side fit in a 19"inch rack

  • Managed Ethernet Switch with mixed media port types
  • Carrier Class packaging for mounting in 19"or ETSI or 23" Telco racks with front-to-rear fan cooling
  • Provides two modular slots for user selection of 100Mb and 10Mb fiber ports, Gigabit fiber ports, PoE ports, and 10/100 copper ports, up to 16 total ports max.
  • Wide selection of fiber ports, features Small Form Factor (SFF) connectors, both MTRJ and LC, multi-mode and single mode.
  • Power input choices include: -48 VDC, 24 VDC, AC, 125 VDC, optional dual-source DC
  • Tested for high availability Telco and Industrial applications, NEBS compliant
  • Comprehensive Magnum MNS-6K software includes: RMON, SNMP, Telnet, IGMP, VLANs (Port-based and Tag-based), GVRP, Port-mirroring, CLI, Secure Web Management, Password Security, Port Security, SNTP, Event Log, BootP, DHCP
  • IGMP Snooping with Multicast Message Filtering or Pruning
  • Manages redundant rings with the S-Ring™ software product, including gigabit ring structures, Spanning Tree Protocol (STP) and RSTP
  • Supports Link-Loss-Learn™ (LLL) feature for fast ring recovery as a ring member
  • Companion product to the Magnum 6K25 which is NEBS Level 3 and ETSI Certified


/index.php?plg=sslfixer&url=http%3A%2F%2Fwww.garrettcom.com%2Fimages%2Fconfiguration1.jpg E1d05ec2c9ab1b2aeaa2884dee0e8597 D0897ef0d83df5c7802fb2ecf6e6384a

 

 

Related links:

MNS-6K Software

Secure Web Management

Security

Redundancy

Pictorial Overview

Reverse Rack-mount Models

6K Port Modules

Gigabit Modules

PoE Modules

Magnum 6K Family of Managed Switches

Magnum Industrial Switches Pictorial (pdf)

All Managed Ethernet Switches

Comparison Chart of 6K16 and 6K16V

Read more...